How many m3 are in a kg of natural gas?

How many m3 are in a kg of natural gas?

– Natural gas: 1 m3 = 0,829 kilogram; – Other gas: variable dependent on composition.

How many cubic meters are in a kilogram?

1 m3 / cu m = 1,000.00 kg wt.

How much is 1m3 of natural gas?

Cubic meters are a unit of volume. 1 m3 of natural gas is equal to: 35.315 cubic feet of natural gas. 35,300 BTU.

How many cubic meters of LPG gas are in a 14.20 kg cylinder?

270m3. There are 3.7L in one cubic meter.

How many Litres are in a cubic meter of natural gas?

1 cubic meter is 1000 liters.

What is a unit of LPG gas?

A liquid propane gas measurement unit for liquid volume, LPG gas is measured in litres or gallons for gas measurement. The LPG gas measurement unit for the measurement of gas volume, such as natural gas volume, is cubic metres (m³) or cubic feet (ft³) gas units.

Is m3 the same as kg?

The kilogram per cubic metre (symbol: kg·m−3, or kg/m3) is the coherent SI derived unit of density, defined by mass in kilograms divided by volume in cubic metres….

How many cm3 are in a kg?

1 cm3 / cc = 0.001 kg wt.

How do you calculate cubic weight in kilograms?

Cubic Weight works like this:

1. Measure your parcel in all three dimensions, in centimetres;
2. Multiply the three measurements together;
3. Divide that result by 4000;
4. You’re left with the cubic weight (in kilograms)

What is m3 on gas meter?

This type of meter measures gas usage in cubic metres (m3) and normally displays five numbers then a decimal point, followed by more numbers. Digital gas meters will also display the units ‘M3? near the reading. To read the meter, write down the first five numbers reading from left to right including any zeros.

How do you convert gas SCM to kg?

Compressed natural gas weighs 0.1282 gram per cubic centimeter or 128.2 kilogram per cubic meter, i.e. density of compressed natural gas is equal to 128.2 kg/m³. In Imperial or US customary measurement system, the density is equal to 8.0033 pound per cubic foot [lb/ft³], or 0.074104 ounce per cubic inch [oz/inch³] .

How do you calculate gas usage?

Calculating gas use Subtract your current gas meter reading from your previous reading to work out how many cubic meters or feet you have used. If your measure is in cubic feet, multiply by 2.83 to convert to meters.

What is 1 cubic meter of LPG in kg?

One cubic metre of LPG weighs 1.8315 kg (1m³ = 1.89 kg), which is an LPG gas to LPG liquid conversion.

How is LPG gas consumption calculated?

You take the MJ/hr or BTU/hr ratings from the manufacturer and divide it by the relevant value in the chart above. For example, a 25MJ heater will consume 1 litre per hour or a 91,502 BTU heater will consume 1 gallon of propane per hour.

What does LPG gas weigh?

Domestic cylinders will have their tare (empty) weight printed on them and gas agencies should fill it with 14.2 kg LPG. The gross weight of the cylinder should be arrived at by adding tare weight and the amount of 14.2 kg LPG.

How much does a cubic metre of LNG weigh?